STV Racking
STV™ Hardware Store Kit
STV™ Hardware Store Kit
Couldn't load pickup availability
Introducing the New Hardware Store Kit!
Our latest offering includes 3 SVT Racking Towers with 16mm line bore spacing for ultimate flexibility. The kit comes with 30 trays and eight additional Torpedo Dock sets, allowing you to attach extra Packout boxes on the sides. This system is designed exclusively for Packout Organizers as they are a skinnier width. We can make a similar unit using our standard STV Racking width that can accommodate all of the Packout containers. If you are interested, message us using the "Contact Us" page.
This kit is intended for stationary applications
The tower units are made from 3/4" plywood, and the trays are 1/2" plywood. We use prefinished UV Birch plywood.
The assembled unit is 60" tall (plus caster height) x 17" deep x 65-13/16" wide
Tired of a Cluttered Work Van or Trailer?
If your tool organizers are scattered across the floor, it’s time to organize with the STV Racking System. Featuring 5mm system holes precisely spaced to maximize storage efficiency, this setup is perfect for your shop, van, or trailer.
Assembly Made Easy
All you need to supply are glue, brad nails, and screws to assemble the towers. The tower bottoms are predrilled to accommodate casters—install two casters on each end and alternate the middle four so they can spin freely. The towers are predrilled for THESE casters.
Each system is shipped flat-packed and requires customer assembly. We’ve included a QR code on the packing sheet that links to an assembly video for easy reference. With a bit of wood glue and your choice of mechanical fasteners, you can have the plywood structure ready in under an hour. For a cleaner finish, we recommend using clamps and 18-gauge brad nails. ROO Glue, Titebond Melamine Glue, or any adhesive designed for melamine or prefinished materials will work well.
Please Note:
Glue, brad nails, and screws are not included with the kit. Make sure to watch the assembly video before starting.
Assembly Video: Watch Here
Important:
Tool containers and other items shown in images are not included. This kit includes the plywood racking tower, plates/trays, Torpedo Dock, and drawer slides only.
HELP US EXPAND OUR SELECTION
We are always adding new products and variations of our existing products. If you are not seeing what you are looking for, please us our contact form to request it.
BUILT BY ANDY, NOT AN ASSEMBLY LINE
FREQUENTLY ASKED QUESTIONS
Still stuck? Contact Us Directly.
What are STV Racking products made of?
Depends on the product. Our plywood components (towers, drawers, shelving) use UV Birch Plywood. Smaller organizers and inserts are 3D printed, typically in ABS, with some items made from PETG or HDPE depending on the application. Each product page lists the exact material.
What thickness of plywood is used in STV Racking products?
STV Racking builds most current products in 3/4" plywood. If you need 1/2" material for an older system or a specific reason, use the Design page or email us to start a custom order.
Will my product's color match the photos exactly?
For 3D printed items, color can vary between orders. You may receive black, red, or gray depending on what's in stock when your order is made. If color matching matters for your setup, mention it in your order notes or email us before ordering.
Are STV Racking's 3D printed products heat resistant?
Reasonably, but not indestructible. Products made from ABS offer solid heat resistance compared to PETG or PLA, but ABS can still warp or deform if left in direct sunlight, a hot vehicle interior, or near any heat source for extended periods. Heat-related damage isn't covered under warranty, so treat your organizers the way you'd treat anything else that lives in a truck bed in July.
Do your products work with Dewalt, Ridgid, or other systems besides Milwaukee?
Yes. Several of our tower and drawer products are available in Dewalt ToughSystem 2.0, Ridgid Pro Tool Storage, and Systainer configurations in addition to Milwaukee Packout. Look for the size or tower-type dropdown on the product page.
Can I mix and match brands within one STV Racking system?
Yes, and a lot of our customers do exactly that. Our gallery has real setups combining Packout, Systainers, and other brands on the same tower.
Do STV Racking products come assembled?
Plywood systems (towers, drawers, shelving) ship flat-packed and require assembly. Most can be put together in under an hour with basic tools. 3D printed organizers and inserts arrive ready to install, no assembly required.
What do I need to assemble a tower or drawer kit?
Wood glue and your choice of mechanical fasteners. Glue, brad nails, and screws are not included. Our recommended method: wood glue, then 18-gauge brad nails, then predrill with a #8 countersink bit and secure with a 1.5" #8 SPAX screw. Clamping joints while the glue sets gives you the cleanest finish.
Is there an assembly video?
Yes. You can find it on our Assembly page, and a QR code linking to it ships with plywood kits.
My tower feels wobbly. Is that normal?
Yes, until it's mounted. Towers are designed to be secured to the wall of your shop, trailer, or van. Make sure it's plumb before you screw it in, and the wobble goes away.
Can I get a custom-sized tower?
Height is easy to adjust. Width is standard across our systems. If you need something outside standard dimensions, a quick call or email gets you a custom quote.
Do the drawers come with dividers?
Depends on the product. Some drawer kits include optional dividers you can install however you like, split into equal sections or leave open. Check the specific listing for what's included with your size.
