Battery Holders

BOSCH INFORMATION:

Use this holder to easily mount four 18V Bosch batteries to your wall, under your workbench, in your trailer, or van. Batteries clip in using the existing locking clip so can be mounted in any direction.

Dimensions: 12-5/8" x 4"

Why not buy two, to have a rack each for charged and uncharged batteries?

MAKITA INFORMATION:

Use this holder to easily mount four 18V Makita batteries to your wall, under your workbench, in your trailer, or van. Batteries clip in using the existing locking clip so can be mounted in any direction.

Dimensions: 12.5" x 4"

Why not buy two, to have a rack each for charged and uncharged batteries?

RIDGID 18V INFORMATION:

Use this holder to easily mount three 18V RIDGID (AEG) batteries to your wall, under your workbench, in your trailer, or van. Batteries clip in using the existing locking clip, so can be mounted in any direction.

Dimensions: 11-1/2" x 4-1/2"

Why not buy two, to have a rack each for charged and uncharged batteries?

DEWALT 20V INFORMATION:

Use this holder to easily mount four 20V Dewalt batteries to your wall, under your workbench or in your trailer or van. Batteries clip in using the existing locking clip, so can be mounted in any direction.

Dimensions: 12-3/4" x 4"

Why not buy two, to have a rack each for charged and uncharged batteries?

* The 48 Tools DeWalt battery holder is designed to take 4 standard 20-volt batteries and does not fit the wider 2ah batteries or 4x 54V flex volt batteries. If fitting Flex Volt batteries they must be interchanged next to a standard battery

DEWALT FLEXVOLT INFORMATION:

Use this battery holder to easily mount 4x (four) Dewalt FLEXVOLT batteries

- onto your wall in the workshop
- on the side or under your workbench

- in your trailer, van, or truck.

The batteries click-in using the existing locking mechanism from the battery. That means the battery holder can be installed in any position and the batteries retain in there.

Dimensions: 14" x 4"

Why not buy two, to have a rack each for charged and uncharged batteries?

MILWAUKEE 18V INFORMATION:

Use this holder to easily mount four 18V Milwaukee batteries to your wall, under your workbench, in your trailer, or van. Batteries clip in using the existing locking clip, so can be mounted in any direction.

Dimensions: 14-1/4" x 3-1/2"

Due to a design change, the Milwaukee picture is not accurate. A 5th mounting hole has been added to prevent sagging.

Why not buy two, to have a rack each for charged and uncharged batteries?