STV Racking™ Tower - Select Tray Count (Loc-Slides)

Watch the Assembly Video Here

Our kits are expensive, but please keep in mind these are very heavy and shipping is included in our pricing.

STV Racking is now moving to all 3/4" plywood material. If you would like 1/2" material, please use the "Design" page and email us to start the custom order process.

Are you tired of your messy Shop, Trailer, or van? If your tool organizers are cluttered and scattered on the floor, it’s time to change. The SVT Racking System is the perfect solution for organizing your shop, van, or trailer. Featuring 5mm system holes precisely spaced for maximum efficiency, it allows you to store and access your tool organizers with ease.

Each system arrives flat-packed and ready for you to assemble. You can assemble the plywood structure in under an hour with just a little wood glue and your preferred mechanical fasteners. We recommend using clamps to hold joints while the glue dries for a clean finish. Our preferred assembly method uses, wood glue and then tack the parts together using 18-gauge brad nails. Then predrill with a #8 countersink bit and use a #8 SPAX screw that is 1.5" long.

The towers will be wobbly until they are installed. Mounting them to your Shop, trailer, or van wall really secures them in place. Make sure they are plumb when installing.

We can make custom-sized towers. Height is easily adjustable, but our width is somewhat standard. We can explain that via a consultation call or email.

3/4" Plywood Standard Unit Dimensions: 

• Systainer: 71" high x 19 7/16" wide x 17" deep
• Milwaukee Packout: 71" high x 25 5/16" wide x 17" deep
• Dewalt Tough System: 71" high x 25 5/16" wide x 17" deep
• Ridgid Pro Tool Storage System: 71" high x 25 5/16" wide x 17" deep

What is included:

• 1 - Tower (dimensions above or custom)
• Per "Tray Count" you select
  • 1 set of Drawer Slides
  • Screws to attach the drawer slides to the tower.
  • Screws to attach the tray to the drawer slides.
  • Connecting arm
  • Screws to attach the connecting arm to the drawer slides.
  • One Torpedo Dock set (If Packout is selected)
    • Two Torpedo Rails
    • One Catch/Latch (Additional catches/latches can be purchased HERE)
    • Screws to secure rails and catch to the 3/4" Tray

Note: Glue, brad nails, and screws are not included for assembly. Please refer to the assembly video for guidance.

DISCLAIMER

Tool containers and any other items shown in the pictures are not included. This product listing consists of the plywood racking tower, plates/trays, and drawer slides only.